Type: True condenser pressure-gradient microphone with 1.0 inch diaphragm and FET pre-amplifier

Polar pattern: Cardioid

Controls: Selectable low-cut filter and 10dB pad

Open circuit sensitiity: 16mV/Pa=-36dBV (0dBV=1V/Pa) -10dB attenuation externally selectable

Frequency range: 30 to 20,000Hz

Rated output impedance: < 200 Ohms

Recommend load Impedance: ³1000 Ohms

Max. SPL (0.5% THD @1000Hz): 143dB

Clipping level (@1000Hz, 1kohm load): -1.6dBV (0.83V)

Equivalent noise level to DIN 45405(CCIR468-2): 26dB

Max. SPL (1% THD @1000Hz): 131dB

IEC 268-4(A weighted): 18dB-A

S/N ratio re 1Pa: 76dB

Dynamic range (max SPL to A-weighted noise level): 125dB

Low cut: 80Hz, 12dB/octave

Capsule capacitance: 56pf

Power requirement: +48VDC phantom power

Current consumption: < 3mA

Connector: 3-pin XLR (gold plated)

Phasing: Positive voltage on pin 2 relative to pin 3

Mic cable: 3-pin XLR standard cable (not supplied)

Size:

Net weight: 21oz (600g)