Nady Product Spec Information

OVERALL SYSTEM PERFORMANCE
Frequency Response: 25Hz-20 kHz, ± 3 dB

Dynamic Range: 120 dB

Total Harmonic Distortion: < 0.3%

RF Carrier Frequencies: Selected frequencies between 169 and 216 MHz

Modulation: FM ± 15 kHz

Operation Range: 250 ft. typical; up to 500+ ft. line-of- sight

NADY 401 VHF TRANSMITTERS
Audio Input Impedance:

Nady GT-3: 1.0 M ohm.
Nady LT-3: 600 ohm electret condenser mic permanently attached.
SX-3: 20 K ohm, with mini XLR connector and phantom DC power for any electret condenser lavalier microphone or headmic.
Nady HT-3: optimally matched to mic element used

Audio Connector:

Nady GT-3: Instrument connecting cord with 1/4" mono phone plug.
Nady LT-3: Nady E-701 lavalier mic is hardwired to transmitter.
SX-3: mini XLR

Controls: Power ON/OFF, AUDIO ON/OFF (HT-3) OFF/STANDBY/ON (LT-3/SX-3,GT-3), Input Level Adjust

LED Indicator: Unit "ON" (single flash), Low Battery Alert (steady)

Antenna: All have integral antenna

RF Power Out: 50 mW (max allowed by FCC)

Harmonic and Spurious Emissions: <- 40 dB

Battery: 9V alkaline

Battery Life: 16-20 hours. (The Link™: 8-10 hours)

NADY 401 VHF RECEIVER
Controls: Power ON/OFF, volume control and RF mute adjustment for each of the four channels

Audio Output: 600 ohm unbalanced

Connectors: 1/4" mono phone jacks for each channel, SO-239 antenna connectors, 3.5 mm DC power jack

Indicators: LED power indicator, "TX" LED for each channel

Unwanted Signal Rejection: 60 dB image and spurious

Power Requirement: 12 V DC @ 400mA tip positive. AC adapter included

Dimensions: 16.5" (L) x 7.5" (W) x 1.75" (H) (41.9 x 19.4 x 4.5 cm)

Weight: 2 Kg (4.5 lbs)