Type: True condenser pressure-gradient microphone with 1.1 inch diaphragm and FET pre-amplifier

Polar Pattern: Selectable Cardioid, ommi- directional and figure 8

Controls: Selectable low-cut filter and 10dB pad

Open Circuit Sensitivity: 10mV/Pa=-40dBV (0dBV=1V/Pa) -10dB attenuation externally selectable

Frequency Range: 20 to 20,000Hz

Rated Output Impedance: < 200 Ohms

Recommend Load Impedance: ³1000 Ohms

Max. SPL (1% THD @1000Hz): 134dB

Equivalent Noise Level to DIN 45405(CCIR468-2): 26dB

IEC 268-4(A weighted): 18dB-A

S/N Ratio re 1Pa: 76dB

Power Requirement: +48VDC phantom power

Current Consumption: < 3mA

Ambient Temperature Range: 14ûF to 140ûF(-10ûC to +60ûC)

Relative Humidity Range: 90%(68ûF, 20ûC), 85%(140ûF, 60ûC)

Connector: 3-pin XLR (gold plated)

Phasing: Positive voltage on pin 2 relative to pin 3

Mic Cable: 3-pin XLR standard cable (not supplied)

Size: Diameter: 2.1" (55mm), Length: 6.5" (165mm)

Net Weight: 15oz (430g)